apps.AppDB

Haaze provides two different ways of making a mono (or a not-wide-enough-stereo) signal to a wider stereo signal.

By splitting the input signal into 16 different frequency regions, spanning from 20 Hz to 20kHz, Haaze can add different amount of stereo-widening to different frequency regions. This makes it possible to transform a mono track into a natural sounding stereo track (by for example keeping lower frequencies in mono while spreading the higher ones).

Haaze is using two different stereo widening techniques, Haas (short delays between left and right channel) and ”Split EQ” (different gain on different channels on different frequency regions).

Noteworthy features:

• AUv3, works with AUv3 compatible hosts like Cubasis, Auria, AUM etc.

• 16 separate frequency regions with independent parameters on each band

• Two different stereo widening algorithms (Split EQ and Haas)

• Convenient and easy-to-use user interface

Usage:

To apply the Haas effect, click and drag the spring component horizontally. The top-most part applies the effect on higher frequencies, and the bottom-most part applies the effect on lower frequencies.

To apply the ”Split EQ” effect, drag the LOW (bass frequencies), MID (mid frequencies), HIGH (high frequencies) sliders to apply the effect.

The MIX knob mixes the input audio with the processed audio.
NOTE: When setting the MIX knob somewhere in the middle, there might be noticeable phase issues (if so, we recommend setting the value to max and adjusting the other parameters instead).

Important: Haaze in stand-alone mode does not support IAA, Audiobus. You can try it out using the microphone, but beware of audio feedback (use headphones!). We recommend using Haaze with AUv3 compatible hosts.

iPhone 6 or later is recommended.
iPad Air 1 or later is recommended.

Documentation is available at https://klevgrand.se/products/haaze

Feedback or suggestions? Drop us a mail: support(at)klevgrand.se or @klevgrand on Twitter